Volumetric and board foot wood calculator

Work out the volume of a board or slab in board feet and cubic metres. Free, no sign-up.

Enter your measurements

Units
Board feet16
Cubic metres0.0378

Working with wood all day?

iMill is a volumetric wood calculator and pricing app for small sawmills and wood millers. Save your own rates per wood type, send customers a clean estimate and keep track of your sales, right from your phone.

See what the iMill app does

How to calculate board feet

A board foot is a unit of lumber volume: a piece 1 inch thick, 12 inches wide and 12 inches long (144 cubic inches).

Board feet = thickness (in) × width (in) × length (ft) ÷ 12

For example, a board 2 in thick, 12 in wide and 8 ft long is 2 × 12 × 8 ÷ 12 = 16 board feet. Multiply by the number of pieces if you have several of the same size.

Board feet to cubic metres

The metric measure of wood volume is the cubic metre. One board foot is 0.002360 cubic metres, so one cubic metre is about 423.8 board feet. To work in metric, switch the calculator to millimetres and metres. The volume is thickness × width × length × pieces, all in metres.

Common sizes

Volume of common sizes (actual dimensions)
Size (thickness × width × length)Board feetCubic metres
1 in × 6 in × 8 ft40.0094
1 in × 12 in × 8 ft80.0189
2 in × 4 in × 8 ft5.330.0126
2 in × 12 in × 8 ft160.0378
4 in × 12 in × 10 ft400.0944
3 in × 24 in × 8 ft (slab)480.1133

Common questions

Do I use nominal or actual sizes?

Sawmills usually measure the actual (rough) size of each piece, which is what this calculator expects. Hardware-store lumber is often sold by nominal size, where a “2×4” is really smaller, so check which one you are working from.

What does 4/4 or 8/4 mean?

Hardwood thickness is often given in quarters of an inch. 4/4 (“four-quarter”) is 1 inch thick, 5/4 is 1.25 inches, 6/4 is 1.5 inches and 8/4 is 2 inches. Enter the thickness in inches (for example 1.25 for 5/4).

How do I measure an irregular live-edge slab?

Measure the thickness and length, then take the average width, or measure the widest and narrowest points and average them. That gives you a fair volume for the wood in the slab.

Does this calculator save my numbers?

No. Everything is worked out in your browser and nothing is sent to us or stored. Refresh the page and it resets.

Is the result exact?

The maths is exact for the sizes you enter, rounded for display. Real boards vary, so allow for waste, trim and measuring differences.